Every part walks the same line — forged hot, machined true, cast, fabricated, automated and gauged. Order is earned from raw material, one station at a time.
6 stations on the line±0.01 mm held100% gauged out
DWG FP-02 · the line is live
STEP 01
Forge
Raw billet heated to temperature and shaped under the hammer — grain follows the part.
STEP 02
Mill
Machined to the drawing on multi-axis CNC, gauged in-process to ±0.01 mm.
STEP 03
Cast
Near-net shapes poured from spectro-checked melt and knocked out clean.
STEP 04
Fabricate
Cut, formed and coded-welded into frames and weldments that hold load.
STEP 05
Automate
Robotic cells run the line to rate and take the variation out.
STEP 06
Gauge
Every critical feature measured and traced — nothing ships until it is true.
The line · capabilities
Why Teams Choose Stalix
An engineering-first partner — senior people, modern tooling and zero-trust defaults baked into everything we build.
Scroll — walk the line →
CELL 01
Tolerance, Held
Every part is gauged to spec — nothing ships out of tolerance, ever.
±0.05toleranceCELL 02
One-Piece Flow
Parts move station to station with no idle queue between operations.
±0.01toleranceCELL 03
Full Traceability
Every part carries its serial, heat number and QC record.
±0.20toleranceCELL 04
Built Around the Part
We design the cell around your part, not a fixed catalogue of machines.
±0.10toleranceCELL 05
Measured Twice
In-process gauging catches drift before it becomes a scrap report.
±0.02toleranceCELL 06
Always On
The line runs to rate with monitored uptime and fast changeover.
±0.005toleranceCELL 07
One Work Order
Tooling, fixtures, run and inspection — handled under a single ticket.
±0.05tolerance
The standards · how we hold tolerance
How We Operate
A clear, repeatable path from first audit to always-on operations.
// control plan · live readout6 standards · all held
STD-01
Discovery & Audit
We map your systems and surface risks and quick wins before touching a thing.
0%Held
STD-02
Engineering Programs
Structured roadmaps that turn fragile stacks into dependable platforms.
0%Held
STD-03
Embedded Teams
Senior engineers working inside your team, lifting standards and velocity.
0%Held
STD-04
Secure by Design
Hardened, observable, zero-trust environments — secure from the ground up.
0%Held
STD-05
Continuous Delivery
Automated build, test and release so every change ships safely, on demand.
0%Held
STD-06
Always-On Support
24/7 monitoring and on-call response — incidents handled before you wake.
0%Held
Each capability, its own bay
Capabilities Built for Your Stack
Pick the capability your stack needs today — each one owned end to end by senior specialists.
CI/CD, IaC and release automation that ship safely, every single time.
08BAY 08
Cell · in service
Platform Engineering
Internal developer platforms and golden paths that remove friction.
The crew · who runs the floor
Meet the Operators
Senior engineers who treat your uptime, security and scale as their own.
ID #001Daniel CarterPrincipal Engineer · SRESTATION FORGE6 yrs on the lineID #002Sophia BennettCloud ArchitectSTATION MILL9 yrs on the lineID #003Michael ReynoldsSecurity LeadSTATION CAST12 yrs on the lineID #004Olivia HarperData EngineerSTATION FAB15 yrs on the line
What we've shipped
What our clients say
Parts shipped, tolerances held — in the words of the people who run the floor.
PASSEDJOB #1024
We handed them a scrap-rate problem and got back a line that holds tolerance.
Emily — Startup FounderPASSEDJOB #1025
Lead times we used to argue about now just ship — quietly, on time.
Michael — CTOPASSEDJOB #1026
Every part comes off gauged and traceable. Our QC stopped firefighting.
Sarah — VP EngineeringPASSEDJOB #1027
They rebuilt the cell around the part, not the catalogue. Cycle time dropped.
Aisha — Manufacturing EngineerPASSEDJOB #1028
First-pass yield went up and stayed up. That is the whole story.
Tomas — Production SupervisorPASSEDJOB #1029
Tooling, fixtures, run — handled. We feed it stock and it makes parts.
Priya — Works Director
// your move · work order
Ready to put it on the line?
Tell us the spec; we will make it real. Join the makers who run their parts down the Stalix line and ship precision — measured twice, made once.
BAY 02
BAY 03
BAY 04
BAY 05
BAY 06
What our clients say
Parts shipped, tolerances held — in the words of the people who run the floor.